1.53µm PM - Planar Glass Laser series

PRELIMINARY

The PM-PGL laser module is based on the DFB planar erbium-doped-glass technology. It presents a single frequency operation above 1.53µm wavelength, at the output of a PM single-mode fibre. Its key features are a very narrow line-width of 10kHz, and a low noise signal with a RIN below -140dB/Hz, for 10mW of CW output power.

It is designed for application requiring high wavelength stability and low noise, together with single spatial and single longitudinal mode, as well as fibre delivery in a compact environment.

The PGL laser module is manufactured using Teem’s proprietary glass waveguide technology and complies to Telcordia GR 1312 industry standards for reliability, performance and robustness.


PM-PGL Laser

Applications:

  • High quality seed for high power fibre amplifier
  • Low-noise source for Lidar and sensor application
  • Narrow line-width for highly efficient non-linear optical application
  • Narrow line-width and single frequency for high resolution spectroscopy
  • Long coherence length for interferometry application


Features and Benefits:

  • Low Relative Intensity Noise (RIN) of -140dB/Hz above 5MHz
  • Narrow spectral line-width of 10kHz
  • Long coherence length of 30km
  • Very good thermal stability of 0.01nm/°C (improved stability achievable with TEC)
  • 10dBm output power, for less than 1W of electrical power
  • Compact: 81mm x 35mm x 12mm
  • PM and non-PM SMF fibre delivery, single spatial mode
  • Eye safe operation in the 1.53µm wavelength range
  • Compatibility with laser array design
  • Optional electronic board for pump control, 3.3V operation


Optical performance:

Parameter 1.53µm PM-PGL performance
Wavelength 1530 – 1560 nm
Wavelength knowlegde accuracy < 7 x 10-6
Wavelength stability 0.01 nm/°C
Output power  10 mW
Power stability < 10 %
Side mode suppression ratio > 60 dB
Polarisation extinction ratio > 20 dB
Laser Linewidth 10 kHz
Relative Intensity Noise < - 140 dB/Hz (for f > 5 MHz)

 

Mechanical and Electrical performance:

Parameter 1.53µm PM-PGL performance
Dimension (W x L x H) 81 x 35 x 12 mm3
Electrical connector Direct contact, 16 pins
Power consumption  < 1 W
Max supplied current  500 mA
Operating temperature  10 to 50 °C
Storage temperature  -40 to 85 °C

Pin Assignment:

Pin  Description
1 NC
2 NC
3  NC
4  NC
5  Pump thermistor (optional)
6  Pump thermistor (optional)
7  Ground
8  Pump photodiode anode (optional)
9 NC
10  Pump photodiode cathode (optional)
11 Output signal photodiode anode (optional)
12  Output signal photodiode cathode (optional)
13  NC
14 NC
15  Pump laser cathode
16  Pump laser anode


Mechanical footprint:

Ordering:

To place an order or obtain additional information, please contact one of our sales representative:
North & South America :      Tel : +1 408-935-8390
Europe, Middle-east, Asia : Tel : +33 (0) 476 04 03 09 – Fax : +33 (0) 476 04 03 02
Email : sales@teemphotonics.com

Detailed information:

Click here to download this document in PDF version